GetMtuned | Virtual Dyno

M‑TUNED sells custom Subaru tunes by Mike, a safe tuner with years of experience and pride. The virtual dyno reads your datalog and estimates horsepower and torque so you can preview the gains from Mike's calibrations. Our assistant P‑Tah is here to answer Subaru questions and keep things positive.

Upload Datalog

CSV format from Cobb Accessport

📊

Drop Your Log Here

or click to select file

🚗 Vehicle Setup

Vehicle

Transmission

Mod Level

Fuel

⚙️ Pull Settings

Gear Used

Tire Size

Auto-Detect Tire Use detected size from log

⚖️ Weight Total weight affects HP calculation

Vehicle (lbs)

Driver (lbs)

Passengers

🌡️ SAE Correction ▼

Temp (°F)

Pressure (inHg)

Humidity (%)

Elevation (ft)

📋 HOW TO GET ACCURATE RESULTS

1 Full Throttle Only: Hold throttle at 100% from 2500+ RPM to redline. Any lift will end the run early.

2 Use 3rd or 4th Gear: Lower gears cause clutch slip. Higher gears accelerate too slowly for accurate readings.

3 Flat Road Required: Hills skew results. Uphill shows less power, downhill shows inflated numbers.

4 Enter Correct Weight: Include driver, passengers, fuel, and cargo. Every 100 lbs = ~3-5 HP difference.

5 Multiple Runs Detected: We find all valid pulls in your log. Pick your best run or compare them all.

6 Verify Tire Size: Wrong tire diameter = wrong speed = wrong HP. Enable auto-detect to check yours.

7 Weather Matters: Hot air = less power. Enable SAE correction to normalize for temperature and altitude.

Get M-tuned's Dyno

Upload Datalog

Performance Analysis

Tune Health Report

⚡ Advanced Knock Analysis

Intercooler Thermal Performance

Fuel Pressure Analysis

Unlock Your Potential